DS-2CD2735FWD-IZS Motorized Auto Focus 2.8-12MM
- Up to 3 Megapixel high resolution
- 2048×1536 @30ips
- Motorised Varifocal Lens 2.8-12mm
- Ultra-low light
- 120dB Wide Dynamic Range
- 3D Digital Noise Reduction
Share:
Camera |
|
| Image Sensor: | 1/2.8″ Progressive Scan CMOS |
| Signal System: | PAL/NTSC |
| Min. Illumination: | Color: 0.005 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Color: 0.009 Lux @ (F1.6, AGC ON), 0 Lux with IR | |
| Shutter time: | 1/3 s to 1/100,000 s |
| Slow shutter: | Support |
| Lens: | 2.8 to 12 mm |
| Horizontal field of view: 97°to 33° | |
| Vertical field of view: 69°to 25° | |
| Diagonal field of view: 130°to 41° | |
| Lens Mount: | φ14 |
| Adjustment Range: | Pan: 0° to 355°, tilt: 0° to 75°, rotate: 0° to 355° |
| Day& Night: | IR Cut Filter |
| Wide Dynamic Range: | 120 dB |
| Digital noise reduction: | 3D DNR |
| Focus: | Auto |
Compression Standard |
|
| Video Compression: | H.265+/H.265/H.264+/H.264/MJPEG |
| Video bit rate: | 32Kbps~16Mbps |
| Audio Compression: | G.711/G.722.1/G.726/MP2L2/PCM |
| Audio bit rate: | 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2) |
| Triple Streams: | Yes |
Image |
|
| Max. Image Resolution: | 2048×1536 |
| Frame Rate: | 50Hz: 25fps (2048 × 1536, 1920 × 1080, 1280 × 720) |
| 60Hz: 30fps (2048 × 1536, 1920 × 1080, 1280 × 720) | |
| Sub Stream: | 50Hz: 25fps (640 × 480, 640 × 360, 320 × 240) |
| 60Hz: 30fps (640 × 480, 640 × 360, 320 × 240) | |
| Third Stream: | 50Hz: 25fps (1280 × 720, 640 × 360, 352 × 288) |
| 60Hz: 30fps (1280 × 720, 640 × 360, 352 × 240) | |
| Image Enhancement: | BLC/3D DNR/BLC |
| Image Settings: | Rotate mode, saturation, brightness, contrast, sharpness and white balance adjustable by client software or web browser |
| ROI: | Support 1 fixed region for main stream and sub stream separately |
| Day/Night Switch: | Day/Night/Auto/Schedule/Triggered by Alarm In |
Network |
|
| Network Storage: | microSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR |
| Alarm Trigger: | Motion detection, tampering alarm, HDD full, HDD error, network disconnected, IP address conflicted, illegal login |
| Protocols: | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, |
| IGMP, 802.1X, QoS, IPv6, Bonjour | |
| General Function: | One-key recovery, Anti-Flicker, three streams, heartbeat, mirror, password protection, video |
| mask, Watermark, IP address filtering | |
| System Compatibility: | ONVIF (Profile S, Profile G), ISAPI |
Interface |
|
| Audio: | 1 input (line in, 3.5 mm), 1 output (line out, 3.5 mm), mono sound |
| Communication Interface: | 1 RJ45 10M / 100M Ethernet interface |
| Alarm: | 1 alarm input, 1 alarm output (max. 12 VDC, 30 mA), terminal block |
| Video Output: | 1Vp-p Composite Output(75Ω/CVBS) (For adjustment only) |
| On-board storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
| Reset Button: | Yes |
Audio |
|
| Environment Noise Filtering: | Support |
| Audio Sampling Rate: | 8 kHz/16 kHz/32 kHz/44.1 kHZ/48 kHz |
Smart Feature-set |
|
| Behavior Analysis: | Line crossing detection, Intrusion detection, Unattended baggage detection, Object removal detection |
| Line Crossing Detection: | Cross a pre-defined virtual line |
| Intrusion Detection: | Enter and loiter in a pre-defined virtual region |
| Unattended Baggage: | Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
| Object Removal: | Objects removed from the pre-defined region, such as the exhibits on display. |
| Exception Detections: | Scene change detection |
| Recognition: | Face Detection |
General |
|
| Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F) |
| Humidity 95% or less (non-condensing) | |
| Power Supply: | 12 VDC ± 25%, PoE (802.3af Class3) |
| Power Consumption: | 12 VDC, 0.75A, max. 9.5W |
| PoE (802.3af, 36V to 57V), 0.1A to 0.3A, max. 11W | |
| Impact Protection: | IK10 |
| Weather Proof: | IP67 |
| IR Range: | Up to 30m |
| Dimensions: | Φ153.4 × 133.1 mm (Φ6.04″ × 5.24″) |
| Weight: | Camera: 1287 g (2.84 lb.) |
