DS-K6Y220TX Smart Value Flap Barriers
- Support PC & Mobile web configuration and self-diagnosis for maintenance.
- AP mode function for mobile phones (Android) to access more easily by a simple touch via NFC tag.
- Fire linkage: When the fire signal is triggered, the barrier will be open automatically for emergency evacuation.
- Supports built-in face recognition camera module on the top of cover, easy and convenient.
- Anti-passback: Supports cross-device anti-passback function, effectively preventing unauthorized personnel from following in.
- Description
Description
System
- Motor: brushless motor
- MCBF: ≥ 5 million times
- Operating system: Linux
- dToF sensor: x 4
Network
- Wired network: 10/100 Mbps self-adaptive Ethernet
- Wi-Fi: Supported, only for AP mode
Interface
- Network interface: 2
- Alarm output: 4
- RS-485
Main: 2
Sub: 2
- RS-232
Main: 1
Sub: 1
- Wiegand
Main: 1
Sub: 1
- USB
Main: 1
Sub: 1
- Fire alarm input1
- Case input
Main: 1
Sub: 1
Hardware
- Access controller: Supplied
- Supercapacitor: Supplied
- Network switch: Not supplied
- Card receiver: Support
- Expansion screw: M12*150mm(5.9”) 6pcs
Capacity
- Face capacity: 100,000
- Card capacity: 200,000
- Event capacity: 100,000
Authentication
- QR code: Optional
- Face recognition distance: 0.5 m to 2 m
- Face recognition accuracy rate: ＞99%
- Face recognition duration: ＜200 ms
- Card Type: EM/M1 card
- Card reading frequency: 13.56 MHz and 125 KHz
- Card reading distance: 0 to 3 cm
- Card reading duration: ＜1 sec
Function
- Configuration via PC Web: Support
- Configuration via mobile Web: Support
- Hik-Connect: Support
- Multi-factor authentication: Support
- Face anti-spoofing: Support
- Face mask recognition: Support
- Built-in face recognition: Support
- Communication protocol: ISAPI
- Keyfob: Support, 433 MHz/868 MHz, within 50 m
General
- Throughput
30 to 60 persons per minute
The actual throughput is affected by the person passing rate and passing method.
- Lane width550 mm (21.65″)
- Barrier material12 mm acrylic glass
- Pedestal materialSUS304 stainless steel
- IndicatorLane status indicator, authentication indicator and barrier light
- Power consumption
Standby: 20 W
Working: 60 W
Peak: 90 W
- Working temperature-20 °C to 70 °C (-4 °F to 158 °F)
- Working humidity10% to 95% (No condensing)
- Protective levelIPX4
- Dimensions
Without package: 1200 mm × 1000 mm × 139.4 mm (47.24″ × 39.37\” × 5.48\”)
With package: 1290 mm × 1140 mm × 390 mm (50.78 × 44.88\” × 15.35\”)”
-
Net:
Left: 30.15 kg (66.5 lb)
Middle: 38.27 kg (84.4 lb)
Right: 29.58 kg(64.8 lb)
Gross:
Left: 49.15 kg (108.4 lb)
Middle: 56.27 kg (124.1 lb)
Right: 37.85 kg (107.1 lb)
- Power supply method100-240V～,50Hz/60Hz
- LanguageEnglish, French, Portuguese (Brazil), Spanish, Russian, German, Italian, Polish, Arabic, Turkish, Vietnamese, Hungarian, Dutch, Romanian, Czech, Bulgarian, Ukrainian, Croatian, Serbian, Greek, Portuguese, Slovak
- Interconnecting cable length6.5 m
Configuration
- Lane width: 550
- Pedestal length: 1206 mm
- Module selection: YES
- Pedestal width: 303 mm
- Wall distance: 20 mm
- Base: YES
- Barrier material: Acrylic glass
- Application environment: Indoor and Outdoor
- Authentication mode: QR code;Card
- Card type: M1;EM
- Recommended width: 550 mm
- Base model: DS-KSM01/Y220
- Product type: Flap barrier
- Remote controller type: 433Mhz;868Mhz
- Built-in face recognition: YES
- Convert Face: NO
- Door wing gap: Default:50mm
